4/17/2023 1:04 PM
problems with the spinners on our 1550 mounted on a John Deere 2020A. the spinners do not operate, but the belt works fine. tested voltage at the coil connector to the spinners and the belt. The belt has 12 volts at the connector and the spinner has 7.6 at the connector. Turfco thinks it is the controller that needs replacement. The green light is flashing, which according to the manual means things are ok. Has anyone had this problem?
Thank you
Charlie Saxe
Equipment Manager
Country Club of Scranton
570-587-8521
equipment