Toro 1250 Sprayer Cancel The title field is required!

1. Benjamin Rink

   

   1 posts
   
   4/11/2024 8:04 AM

   Hey guys,
   
   I've got an older Toro 1250 sprayer that is starting to grind on it's way into second gear and will occasionally pop out of gear.  I've made adjustments to the linkage cabling and it doesn't help.  I think I'm down to internal wear on the gears themselves.  Anyone ran into this?  Any experience rebuilding the transaxle? Just replace worn gears? or everything while you have it open?
   
   Thanks in advance!
   
   Ben Rink

   
   
   
   
2. Allen Grafton

   

   2 posts
   
   4/11/2024 11:04 AM in reply to Benjamin Rink

   Responding to give your post some traction.  I would change any seals that I removed, and any obviously worn gears.  I have never had this unit apart.