4/9/2025 5:04 PM
When we hit the pedal raise switch the reels will not raise until manually activating the sequence toggle switch then the front reels will raise but not the rear reel until we hit the sequence toggle again in the wrong position
When we try to raise the reels we have to manually toggle the the sequence switch that is located above the front reals. We have to put the switch in the opposite position it was in while the reels were down.
Once the front reel raises we then toggle the switch to the opposite position and the rear reel will raise.
We have gone though all of the circuit connections and verified continuity in the circuits according to the electrical schematics
the lower real function is acting as designed.
Any help or ideas would be greatly appreciated