Site Pro Handheld Radio Codes Cancel The title field is required!

1. Timothy Muench

   

   3 posts
   
   11/24/2020 11:11 AM

   I have just moved to a new course with Site Pro and LTC+ controllers.  I have had OSMAC for 25 years and know all the radio codes I needed.  However, the codes for this system are different - they don't start with *9, Sat#, code.  Does anybody have a copy of the handheld codes for Site Pro?  My local distributor hasn't been much help.
   
   Tim Muench, CGCS

   
   
   
   
2. Chris Nicholas

   

   5 posts
   
   11/30/2020 3:11 PM in reply to Timothy Muench

   Try this out. This is what I was given when we got the Handheld App that mimics a radio. If it doesn't work, have you tried contacting Toro NSN?
   
   https://drive.google.com/file/d/1Vs3ycKq5KINNakdWeSTgle09GPFWAgOM/view?usp=sharing

   
   
   
   
3. William Murphy

   

   8 posts
   
   12/1/2020 6:12 AM

   Well, I tried attaching documents in different formats but the restrictions of this board have tried my patience.  If you still have not found what you needed leave a reply and I will email it to you.  
   
   
   

   
   
   
   

   Last modified on 01 Dec 2020 12:12 by William Murphy
4. Timothy Muench

   

   3 posts
   
   12/1/2020 6:12 AM in reply to Chris Nicholas

   Thanks.  I tried NSN - no luck.  I'll try these.

   
   
   
   
5. Timothy Muench

   

   3 posts
   
   12/1/2020 6:12 AM in reply to William Murphy

   I think these might be the ones.  You are a better Google searcher than me - I couldn't find them.  If these are, in fact correct, the handheld radio for this system is pretty limited in what it can do.  Not at all like OSMAC.
   
   Thanks

   
   
   
   
6. William Sturm

   

   4 posts
   
   1/15/2021 7:01 AM in reply to Timothy Muench

   Its time for an upgrade!

   
   
   
   
7. James Smith

   

   112 posts
   
   1/27/2021 6:01 AM

   Need to go cellular

   
   
   
   
8. Brian McMinn

   

   1 posts
   
   2/8/2021 11:02 AM in reply to Timothy Muench

   Try *7