Sencor Cancel The title field is required!

1. Jason Schulte

   

   0 posts
   
   6/25/2017 7:06 PM

   Anyone remember the rate for the Muda grass in the tropics? Targeting goose grass

   
   
   
   
2. Jeff Lloyd

   

   0 posts
   
   6/25/2017 8:06 PM

   Sencor by itself 1/2 lb. per A if you lightly water it in you won't see the burn.

   
   
   
   
3. Jason Schulte

   

   0 posts
   
   6/25/2017 9:06 PM

   When mixed does the rate change? Volume of water used?

   
   
   
   
4. Andy Jorgensen

   

   1 posts
   
   6/26/2017 2:06 PM

   Spot sprayed, we use 1oz/ac - or a capfull. For a 25 gallon 12 volt sprayer, thats about .25oz.

   
   
   
   
5. Jason Schulte

   

   0 posts
   
   6/27/2017 5:06 PM

   We have some target 6.6 to pair with it, and I remember the sencor rate being not quite the full rate when paired together. 35 gpa is my thought for the volume but could do 80. Andy do use it primarily for spot spraying goose grass?

   
   
   
   
6. Andy Jorgensen

   

   1 posts
   
   6/28/2017 1:06 PM

   Jason Schulte said: We have some target 6.6 to pair with it, and I remember the sencor rate being not quite the full rate when paired together. 35 gpa is my thought for the volume but could do 80. Andy do use it primarily for spot spraying goose grass?

   
   
   My old mix for for all weeds in Bermuda turf using a 25 gallon spot sprayer was:
   
   MSMA @ 8ozs
   Sencor @ .25oz
   Trimec (3-Way) @ 2ozs
   Dismiss South @ .375ozs
   Monument @ 5 grams
   Spreader Sticker
   
   We can't use MSMA anymore, so lately it's been just the Sencor, 3-way, Dismiss South and Monument. Occasionally I throw in some MSM, but not often cause everything else in the tank usually takes everything out.
   
   When I see Goose, I give it a little extra shot right to the crown. For everything else, just spray over the top.